NamakkalSSMCEAdmission 2020

SSM College of Engineering Admission 2024: B.Tech, M.Tech, MBA, Cut Off, Fees, Eligibility

Namakkal, Tamil NaduEstd 1998 Anna University, Chennai
Claim this college
user_avater
Written By Sapna Malik updated 

SSM College of Engineering was established in 1998 and is affiliated to Anna University, Chennai, and recognized by the University Grants Commission (UGC), New Delhi. It imparts quality education in the fields of Engineering and Management. 

SSM College of Engineering offers undergraduate programs in engineering under five different specializations. It also offers postgraduate programs in engineering and management such as Master Of Technology (M.Tech.) and Master Of Business Administration(MBA). All of its courses are approved by the All India Council for Technical Education (AICTE), New Delhi.

  • B.Tech/ B.E Admissions will be granted on the basis of TNEA Entrance Score.
  • M.E/ M.Tech, MBA and MCA admission will be granted as per the counselling in TANCET exam.
  • Application forms for Admissions can be filled in Online Mode.

SSM College of Engineering Admission Highlights 2023

Name Of the Institute SSM College of Engineering
Institute Type Private
Courses Offered UG, PG
Admission Criteria Entrance Exam, Merit-based
Application Mode Online
Seats(UG Courses) Mechanical Engineering - 120
Computer Science & Engineering - 60
Electronics & Communication Engineering – 90
Electrical & Electronics Engineering - 60
Civil Engineering - 60 Information Technology - 60
Textile Technology - 60
Textile Chemistry - 30
Petro Chemical Technology Petroleum Engineering
Seats(PG Courses) Applied Electronics - 18
Computer Science and Engineering – 18
Thermal Engineering - 18
Textile Chemistry - 18
MBA - 60
Course Fees/Year B.Tech - ₹ 75,000/-
M.Tech - ₹ 50,00/-
MBA - ₹ 50,000/-

SSM College Of Engineering Important Dates

Event Dates
TANCET 2023 Exam (MCA/ M.Tech/ M.Plan/ M.Arch) February 25, 2023
TANCET 2023 Exam (MBA) February 26, 2023

SSM College Of Engineering B.E. / B.Tech Admission 2023

SSM College offers B.E and B.Tech programs in full time mode for a duration of 4 years. The programs are offered in the following specializations:

B.Tech
Mechanical Engineering Computer Science & Engineering Electronics & Communication Engineering Electrical & Electronics Engineering Civil Engineering
B.E
Information Technology Textile Technology Textile Chemistry Petro Chemical Technology Petroleum Engineering
Name of the Course B.E./B.Tech.
Mode of the Course Full-Time
Duration 4 years
Mode of Application Online
Selection Criteria Merit Based

SSM College Of Engineering B.E. / B.Tech. Eligibility Criteria

  • The basic eligibility criteria for admission to B.E./ B. Tech programs is a pass in HSC or equivalent exam with minimum 50% marks in Physics, Chemistry and Mathematics combined.
  • Selection of candidates for the B.E/ B. Tech programs is done on the basis of 10+2 marks through TNEA counselling.

SSM College Of Engineering B.E. / B.Tech. Selection Process

  • Candidates must download the counselling call letter and visit the counselling venue on the assigned dates along with all relevant documents (original and photocopies) and a demand draft of INR 5000.
  • Candidates are required to obtain a counselling form from the bank counters by showing his/her call letter and DD of the prescribed counselling fee.
  • After that, in the supervision of a counsellor, candidates can choose college and course preferences

SSM College Of Engineering B.E. / B.Tech Cut Off

Course Closing Home State rank
B.Tech Information Technology 102935
B.Tech Petrochemical Engineering 63623
B.Tech Textile Chemistry 81171
B.Tech Textile Technology 66982
BE Computer Science and Engineering 102619
BE Electrical and Electronics Engineering 99887
BE Electronics and Communication Engineering 65106
BE Mechanical Engineering 102765
  • Candidate is then offered an allotment order which needs to be signed by the applicant and the demand draft for counselling fee be submitted in order to complete the allotment process.
  • Subsequently, the candidate must report at the college and submit the allotment order to confirm his/her admission.

Documents Required

  • Transfer Certificate
  • Community Certificate
  • 10th Mark Sheet
  • 12th Mark Sheet
  • Migration Certificate [for states other than Tamil Nadu]
  • Consortium Rank Sheet [for management quota students]
  • Allotment Order [for government quota students]
  • Counselling Call Letter [for government quota students]
  • Physical Fitness [for government quota students]

How To Apply For B.E. / B.Tech.?

  • Candidates may apply for TNEA counselling by visiting the Anna University website and filling the online application/ registration form.
  • The prescribed application fee for TNEA counselling can be paid online through various payment modes such as credit/ debit card, internet banking etc.
  • Candidates must take a printout of the complete application form and send a copy of the same to the Director (Admissions), Anna University.

SSM College Of Engineering M.E. / M.Tech Admission 2023

SSM College of Engineering offers M.E./ M. Tech degree programs in the disciplines of Computer Science, Thermal, Applied Electronics, and Textile Chemistry. Selection of engineering candidates is done on the basis of GATE/ TANCET score through TANCA counselling.

The full time M.E/ M.Tech program is offered in the following specializations:

  • Computer Science & Engineering
  • Thermal Engineering
  • Applied Electronics
  • Textile Chemistry
Name of the Course M.E./M.Tech.
Mode of the Course Full-Time
Duration 2 years
Mode of Application Online
Selection Criteria Merit Based

SSM College Of Engineering M.E. / M.Tech. Eligibility Criteria

  • ·The basic eligibility criteria for admission to the M.E./ M. Tech courses is a B.E./ B. Tech degree in the relevant discipline with 50% marks.
  • · The minimum marks eligibility criteria for reserved category candidates is 45% marks (for all PG courses) in the qualifying degree examination.
  • · The candidates with B.E./B. Tech degree through distance mode are not eligible for admission to M.E./ M. Tech programs.

SSM College Of Engineering M.E. / M.Tech. Selection Process

  • Candidates must download the counselling call letter and visit the counselling venue on the assigned dates along with all relevant documents (original and photocopies) and a demand draft of INR 5000.
  • Candidates are required to obtain a counselling form from the bank counters by showing his/her call letter and DD of the prescribed counselling fee.
  • After that, in the supervision of a counsellor, candidates can choose college and course preferences
  • Candidate is then offered an allotment order which needs to be signed by the applicant and the demand draft for counselling fee be submitted in order to complete the allotment process.
  • Subsequently, the candidate must report at the college and submit the allotment order to confirm his/her admission.

Documents Required

  • Transfer Certificate
  • Community Certificate
  • 10th Mark Sheet
  • 12th Mark Sheet
  • All Semester Diploma Mark Sheets
  • All Semester UG Mark Sheets
  • UG Course Completion Certificate
  • UG Provisional Certificate
  • Diploma Degree Certificate
  • UG Degree Certificate
  • Migration Certificate [for states other than Tamil Nadu]
  • Allotment Order [for government quota students]
  • Counselling Call Letter [for government quota students]
  • Physical Fitness [for government quota students]

SSM College Of Engineering M.E. / M.Tech. Cut Off

Course Cut Off
Applied Electronics 34.4
Computer Science and Engineering 25

How To Apply For M.E. / M.Tech.?

  • Candidates may apply for TANCA counselling by visiting the Anna University website and filling the online application/ registration form.
  • The prescribed application fee for TANCA counselling can be paid online through various payment modes such as credit/ debit card, internet banking etc.
  • Candidates must take a printout of the complete application form and send a copy of the same to the Director (Admissions), Anna University.

SSM College Of Engineering MBA and MCA Admission 2023

SSM College Of Engineering offers MBA and MCA programs to eligible candidates pursuing higher studies at the PG level. Selection of engineering candidates is done on the basis of TANCET score through TANCA counselling. MCA and MBA candidates are selected on the basis of marks obtained in TANCET.

Name of the Course MBA | MCA
Mode of the Course Full-Time
Duration 2 years
Mode of Application Online
Selection Criteria TANCET Score

SSM College Of Engineering MBA and MCA Eligibility Criteria

  • The candidate should be pass in a recognized Bachelor’s degree of minimum 3 years duration and obtained at least 50% marks at the qualifying examination.
  • However, in case of reserved category candidates the minimum marks is 45%.
  • Candidates with B.E./B.Tech./M.C.A./M.Sc. degrees obtained through week end courses and B.E./B.Tech. through distance mode are not eligible.

SSM College Of Engineering MBA and MCA Selection Process

  • Candidates must download the counselling call letter and visit the counselling venue on the assigned dates along with all relevant documents (original and photocopies) and a demand draft of INR 5000.
  • Candidates are required to obtain a counselling form from the bank counters by showing his/her call letter and DD of the prescribed counselling fee.
  • After that, in the supervision of a counsellor, candidates can choose college and course preferences
  • Candidate is then offered an allotment order which needs to be signed by the applicant and the demand draft for counselling fee be submitted in order to complete the allotment process.
  • Subsequently, the candidate must report at the college and submit the allotment order to confirm his/her admission.

Documents Required

  • Transfer Certificate
  • Community Certificate
  • 10th Mark Sheet
  • 12th Mark Sheet
  • All Semester UG Mark Sheets
  • UG Course Completion Certificate
  • UG Provisional Certificate
  • UG Degree Certificate
  • Migration Certificate [for states other than Tamil Nadu]
  • Allotment Order [for government quota students]
  • Counselling Call Letter [for government quota students]

SSM College Of Engineering MBA and MCA Cut Off

Course Name Cut Off
MBA 38-40

How To Apply For MBA and MCA?

  • Candidates may apply for TANCA counselling by visiting the Anna University website and filling the online application/ registration form.
  • The prescribed application fee for TANCA counselling can be paid online through various payment modes such as credit/ debit card, internet banking etc.
  • Candidates must take a printout of the complete application form and send a copy of the same to the Director (Admissions), Anna University.

FAQs

Ques. How good are the faculties in SSM College Of Engineering?

Ans. All professors handling core subjects have vast experience and have doctorate. Teachers and other staff always helpful and kind. Infrastructure is good. College has an open space and playground.

Ques. How are the placement records in SSM College Of Engineering?

Ans. The placement is also really good and many companies visit the college. The placement trainings are provided everyday after college hours during the third year of the college. The labs are available for training and practicing aptitude and programming and other skills development in online websites.

Ques. How is the college management in SSM College Of Engineering?

Ans. The college management is quite good in all the aspects starting from academic to other sections of management. Summing up, it's a very good college.

Do you think the Admission details are wrong ?  Report Here

SSMCE Upcoming Application Dates 2024


Expired Events

EventsDates
TNEA Counselling TimelineAug 02, 2024 - Oct 03, 2024
Grievances Redressal (TNEA) [BE/B.Tech]Jul 11, 2024 - Jul 20, 2024
Publication of Rank List (TNEA) [BE/B.Tech]Jul 10, 2024

Do you think the Dates are wrong ?  Report Here

SSMCE Cutoff 2024

Exams

SSMCE, TNEA Cutoff 2023

SSMCE, TNEA Cutoff 2023 for OC Category is listed below. The overall cutoff rank for TNEA is 52473 - 86973


SSMCE, TANCET Cutoff 2022

SSMCE, TANCET Cutoff 2022 for OC Category is listed below. The overall cutoff marks for TANCET is 66.803

Courses
Round 1
66.803

Do you think the Cutoff is wrong ?  Report Here

SSMCE Fees & Eligibility

Full time Courses
CourseFeesEligibilityApplication DateAction
B.Tech
6 Courses
2.2 Lakhs (Total Fees) 10+2 with 50% + TNEA6 May - 11 Jun 2024
BE
5 Courses
2.2 Lakhs (Total Fees) 10+2 with 50% + TNEA6 May - 11 Jun 2024
MBA
5 Courses
41,000 (Total Fees) Graduation-
ME
3 Courses
60,000 (Total Fees) Graduation with 50% + TANCET15 Apr - 14 May 2024
M.Tech
1 Course
60,000 (Total Fees) Graduation with 50% + TANCET15 Apr - 14 May 2024

Do you think the Course details are wrong ?  Report Here

COURSEADMISSION LINK
BE/B.Tech, MBA/PGDM, MCA, ME/M.Tech, Admission Link

Do you think the data is wrong ?  Report Here

Course Finder

Search from 20K+ Courses and 35+ Streams

Clear

Discover More Colleges

Paavai Engineering College (Autonomous)
BE/B.Tech
Paavai Engineering College (Autonomous)
Namakkal
₹50000First year Fees
Mahendra Engineering College
BE/B.Tech
Mahendra Engineering College
Namakkal
₹220000Total Fees
Excel Engineering College
BE/B.Tech
Excel Engineering College
Namakkal
₹209650First year Fees
Muthayammal Engineering College - [MEC]
BE/B.Tech
Muthayammal Engineering College - [MEC]
Namakkal
₹220000Total Fees
KSR College of Engineering
BE/B.Tech
KSR College of Engineering
Namakkal
₹220000Total Fees

Comments



No Comments To Show
Write a Review & Win Monthly Prizes upto ₹100000*
Extra Cash for Selected Colleges
Winners Will Get
prices
prices
prices
prices
Top Courses
MCA
Course Duration:  3 Years
₹40000  First Year Fees
BE Mechanical Engineering
Course Duration:  4 Years
₹55000  First Year Fees
BE Electronics & Communication Engineering
Course Duration:  4 Years
₹55000  First Year Fees
Other Colleges in the Same Group
Faculties
Mr. M.S. Mukhilan
Assistant Professor, Department of Mechanical Engineering
Mr. S. Govindaraju
Assistant Professor, Department of Mechanical Engineering
Mr. G. Ravi Sankar
Assistant Professor, Department of Mechanical Engineering
Udemy course
Student Also Visited
Arunai Engineering College - [AEC]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Arunai Engineering College - [AEC]
KLN College of Engineering - [KLNCE]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
KLN College of Engineering - [KLNCE]
Mohamed Sathak Engineering College - [MSEC]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Mohamed Sathak Engineering College - [MSEC]
KSR College of Engineering
BE/B.Tech - Bachelor of Technology
220000 Total Fees
KSR College of Engineering
Francis Xavier Engineering College
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Francis Xavier Engineering College
AVS Engineering College - [AVSEC]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
AVS Engineering College - [AVSEC]
Anand Institute of Higher Technology - [AIHT]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Anand Institute of Higher Technology - [AIHT]
KPR Institute of Engineering & Technology - [KPRIET]
BE/B.Tech - Bachelor of Technology
96900 First year Fees
KPR Institute of Engineering & Technology - [KPRIET]
Government College of Engineering - [GCE]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Government College of Engineering - [GCE]
Coimbatore Institute of Engineering and Technology - [CIET]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Coimbatore Institute of Engineering and Technology - [CIET]
Jaya Engineering College - [JEC]
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Jaya Engineering College - [JEC]
Apollo Engineering College
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Apollo Engineering College
Alagappa Chettiar College of Engineering and Technology
BE/B.Tech - Bachelor of Technology
220000 Total Fees
Alagappa Chettiar College of Engineering and Technology