Get Answers on Test Preparation, Admissions & Campus Life

Found 225 QuestionsSet Default
Selected Filters
College
Substream
Sort By:Most Relevant

Which is better, IT at NIT Raipur or ECE at IIITDM Kanchipuram?

PS
Parvathi Subramaniam Posted On : July 7th, 2021
B.Tech Electronics and Telecommunication Engineering, National Institute of Technology, Raipur (2019)

One of my friends from high school used to be a student of IIITDM Kanchipuram and in his opinion, ECE at that institute has a far better system of progressing with the course than the NIT system.

IIITDM Kanchipuram also boasts of having a superior faculty. IT has also been derived from the ECE. Both hardware and software are involved in ECE. So, if you are more inclined towards Physics and Maths, go for ECE.

Categories IT at NIT Raipur ECE at IIITDM Kanchipuram
Course Fee 5.40 lakh 6.55 lakh
Highest CTC 16 LPA 20 LPA
Average CTC 8 LPA 12 LPA
Recruiting Companies Barclays, Adobe, Oracle, HCL, etc. Wipro, UBM, TCS, Value Service, etc.

Thus it is suggested that you go for ECE at IIITDM Kanchipuram than IT at NIT Raipur. ECE also has better scope and opportunities than IT. Graduating with ECE you can sit for placements of both core sectors and corporate sectors.

Read More
0
0
Share
1 Answer

Should I take ECE in MAIT?

AM
Abir Mondal Posted On : July 2nd, 2021
Studied B.Tech Electronics and Communication Engineering, Maharaja Agrasen Institute of Technology (2018)

If you have an interest in ECE, you should go for it. Always give your interest your priority more than the reputation of the college. There is no confusion or doubt that MAIT is a good college but if you are not interested in that and opt for IT at MSIT. Factors like crowd, placement, staff, facilities, and exposure also matter.

Advantages of ECE in MAIT:

  • They offer great placement opportunities where you can sit for both IT and CSE job interviews.
  • They have an incredible faculty, well educated, and highly experienced.
  • The attendance rules are not as strict as in other colleges.
  • ECE is a great branch. It provides you with core knowledge and also gives you a practical insight into the subject.
  • You get great government job offers.
Categories ECE at MAIT
Course Fee 4.69 lakh
Highest CTC 40 LPA
Average CTC 12 LPA
Recruiting Companies ZS Associates, JP Morgan, Amazon, Flipkart, etc.

College like MAIT, if you have an interest in ECE it will take you to great heights, and if you discover later than you don't have any kind of interest in ECE. You can go for an MBA without any fear of attendance issues.

Read More
0
0
Share
1 Answer

Which is better, E&TC at VIIT Pune or a CS at PVG?

AK
Akshay Kulkarni Posted On : December 4th, 2020
Pune Vidyarthi Griha's College of Engineering and Technology, Pune

E&TC at VIIT Pune is a comparatively better option when compared to CS at PVG because of the following reasons.

Given below is a brief highlight of E&TC at VIIT Pune and CS at PVG.

Category

VIIT Pune

PVG

Average CTC

4 LPA

2.2 LPA

Course Fee

6.56 lakhs

4.48 lakhs

Entrance Test

JEE Mains/MHT CET

JEE Mains/MHT CET

Advantages - E&TC VIIT Pune:

VIIT Pune is an autonomous institution and the E&TC is accredited thrice by the National Board of Accreditation (NBA).

Curriculum:

The curriculum of E&TC is regularly updated according to the industry standards and has a wide range of electives to choose from.

Tie-ups:

The institute has many tie-ups such as “VIIT National Instrument LabVIEW Academy”, “Centre of excellence with Texas Instruments and nodal center for training”.

Placements: (Winning Institution - VIIT Pune)

  • Better Placement opportunities with the highest package of about 11 LPA and an average package of 4.69 LPA for the E&TC branch.

  • Major recruiters for E&TC at the institute are IBM, Infosys, Cognizant, Wipro, Accenture, L&T Infotech.

The institute has a long summer vacation during which you can intern and learn new skills that will enhance your resume. The college even offers Foreign exchange programs for interested students.

Read More
2
0
Share
1 Answer

Which is better, IIT Dhanbad for ECE or IIT Bhubaneswar for ECE, placements-wise?

SD
Saurav Deb Posted On : August 13th, 2020
B.Tech Mechanical Engineering Indian Institute of Technology Dhanbad (2018)

For the year 2019, the Electronics and Communication Engineering (ECE) placement rates recorded by IIT Dhanbad and IIT Bhubaneswar were 60.40% and 86% respectively. The average CTC was recorded as INR 15.50 LPA for IIT Dhanbad and INR 11.44 LPA for IIT Bhubaneswar. The highest CTC offered was INR 39.50 LPA for IIT Dhanbad and INR 30 LPA for IIT Bhubaneswar. The B.Tech placement rate was recorded as 76.06% and 89.55% for IIT Dhanbad and IIT Bhubaneswar respectively.

For the branch of ECE, the number of seats available in IIT Dhanbad is 45 for the General category and 43 for the Reserved category equating to a total of 78 seats. Similarly, the number of ECE seats available in IIT Bhubaneswar is 20 for the General category and 20 for the Reserved category equating to a total of 40 seats.

The cut off i.e the closing rank for the gender-neutral category for ECE in the year 2019 was 4464 for IIT Dhanbad and 3691 for IIT Bhubaneswar respectively.

Students tend to pick IIT Bhubaneswar over IIT Dhanbad due to the temporary campus status and younger experience of IIT Dhanbad as an institution, other facilities like infrastructure, sports, faculty are good in both institutes.

The final decision should be taken by comparing both the placement rates and institutes as a whole; giving equal importance to the choice of branch of engineering that you would like to pursue.

Read More
0
0
Share
1 Answer

What should I join? Electronics and Instrumentation at BITS Pilani or Electronics and Communication at MNNIT Allahabad?

AD
Aukur Dutta Posted On : July 9th, 2021
Studied at Birla Institute of Technology and Science, Pilani

Electronics and Instrumentation at BITS Pilani and Electronics and Communication at MNNIT Allahabad both are good choices. Also, BITS Pilani and MNNIT are reputed institutes. So, you should choose either of these two options based on your interest.

I have few friends at BITS, s I can give you some idea about their ENI branch.

  • ENI course offered by BITS Pilani is great in terms of academics and pay package. ENI is derived from EEE courses with only 3 - 4 courses being different from EEE.
  • BITS also offers extensive lab facilities for their EEE branch due to CEERI.
  • According to the recent placement highlights, the average and highest CTC offered at BITS is 15.96 LPA and 9.7 LPA. At MNNIT the average and highest CTC are 10 LPA and 49 LPA respectively.

For further information or so you can definitely visit the official sites of both the colleges. You can also visit their Facebook pages, where you will be able to find seniors from these branches who can give you more information regarding the branches.

Read More
0
0
Share
1 Answer

Which is the better branch, mechanical or E& TC at IET DAVV?

AJ
Ankita Jain Posted On : July 13th, 2021
B.E. Information Technology, Institute of Engineering and Technology, DAVV (2019)

Opt for any of these branches only if you are really interested in either of these branches or if you have plans of pursuing post-graduation in either of the subjects.

The reason behind this lies in whether you will be treating your technical graduation degree just as a simple graduation degree or are you really looking for it. If it is just going to be a simple graduation degree just like in campus placements, government job preparations, MBA entrance preparations, GRE preparations, etc., then it is not worth going for, because there is too much work in these branches.

If this is the case, choose any of the branches from CSE, IT, EI, and Civil Engineering. It will help you in saving a lot of time and hence, prepare well for entrances. Also, you can fully enjoy your college life.

Read More
0
0
Share
1 Answer

What should I choose, CSE at VIIT Pune or E&TC at PICT Pune?

GK
Gaurav Kumar Posted On : September 17th, 2020
B.E Robotics & Mechatronics & ECE, Pune Institute of Computer Technology (2021)

Vishwakarma Institute of Information Technology(VIIT) is an autonomous institute affiliated to Savitribai Phule Pune University. The institute is accredited by the NAAC with an “A” grade. Pune Institute of Computer Technology is a private institute and affiliated to SPPU, Pune.

Admission Procedure-

VIIT and PICT take admission to BE courses based on the performance of the students in JEE Mains and MHT-CET.

  • In 2019 the JEE Main closing cutoff for CSE at VIIT was 2443-2648.

  • In 2019 the JEE Main closing cutoff for Electronics and Telecom Engineering was 1590-1676.

Course Fee- The fees for the CSE at VIIT is 6.75 lakhs for a period of 4 years. Whereas the fees for E&TC at PICT Pune are 3.86 Lakhs for a period of 4 years.

Facilities-

VIIT: The college has a 7-acre campus with a number of facilities such as a digital library, off-campus hostel, cafeterias, sports facilities, and laboratories for each course. The college also provides shuttle service to students and an on-campus convenience store.

PICT: The college is built over a 5-acre campus and has standard facilities such as Wi-FI, library, laboratories, and hostels.

Placements

VIIT: Companies such as Cognizant, Infosys, and L&T visit the campus for E&TC placements. The placement package ranges for the course from 2.4 LPA to 15 LPA.

PICT: E&TC has a placement rate of 70%. Companies such as IBM and Capgemini come for placements. The placement package offered for E&TC varies from 3 LPA to 8 LPA.

CSE and E&TC are very different as a course. You should choose the course you are more passionate about and the college according to that.

Read More
0
0
Share
1 Answer

Which is better NIT Uttarakhand ECE or IIIT Bhopal ECE?

SP
Sushmita Pahari Posted On : July 15th, 2021
B.Tech CSE, NIT UK (2018)

NIT Uttarakhand ECE is definitely a better choice than IIIT Bhopal ECE. NIT UK is a well-established institute with good placement records, while IIIT Bhopal was established just a few years back.

NIT Uttarakhand has the following advantages over IIIT Bhopal.

  • NIT Uttarakhand is an old and established institute and has already gained recognition throughout India.
  • The academics are better with experienced faculties.
  • Decent placements record in all branches especially CSE and ECE.
  • Better connection with the industry so can impart more practical knowledge to the student for the real issue in the industry.
  • According to the recent placement drives, the average CTC offered at NIT UK and IIIT Bhopal is 6.8 LPA and 4.5 LPA.
  • IIIT Bhopal does not even have its own campus yet. The upside of choosing IIIT Bhopal is you will get to learn from the faculties of MANIT Bhopal.
  • Bhopal is also a good location with better connectivity to the other parts of India.

If you are okay going to a fairly new institute, then you can go for IIIT Bhopal. But if you want a convenient college life then choosing NIT UK will be better.

Read More
0
0
Share
1 Answer

Which is better, ET or CS at IET DAVV Indore?

PS
Parveen Sinha Posted On : July 14th, 2021
BE Information Technology, Institute of Engineering and Technology, DAVV (2021)

The most important thing when it comes to such a decision is to follow the subject of your choice and then go for the institute criteria. ET and CSE are different and have major variations in their courses. Being a CSE graduate myself, I would prefer you also opt for CSE as it is widely in demand.

  • ET is comparatively less demanding than CSE in today’s world
  • CSE has more variation and offers various specializations required in the corporate world.
  • CSE has a much better future and its scope increases with each passing day.
  • ET experiences very few core companies for recruitment and not with a heavy package whereas CSE experiences the best recruitment from various core companies and also from tech giants offering hefty packages.
  • ROI (Return of Investment) is considered highest in the CSE branch in every institute.
  • The internship is also better in the CSE branch. Students often get internships offered from 2 places.
  • Faculty wise CSE branch has experienced professors with more than 15 years.

Categories

CSE at IET DAVV

Course Fee

2.74 lakh

Highest CTC

25 LPA

Average CTC

16 LPA

There are several benefits of being a CSE graduate. Top companies like Microsoft, Google, Accenture, Capgemini, Tech Mahindra, Wipro, Infosys, IBM, etc. participate in the placement drive. You will definitely secure a job offer very easily. Due to the huge demand, more and more students opt for CSE than any other branch.

Read More
0
0
Share
1 Answer

Which is the better course between NIT Trichy ECE or IIT Bhubaneswar for Metallurgy ?

DM
Deepika Mishra Posted On : August 14th, 2020
B. Tech Electronics and Communication Engineering National Institute of Technology (2020)

NIT Trichy would be a better choice than IIT Bhubaneswar for Metallurgy because of the following reasons.

  • The placements are better for in ECE than in Metallurgy.
  • If students fail to get core placement in NIT Trichy, they can still try for top-notch coding and management companies recruiting from the ECE department.
  • There are numerous Technical clubs for first years students who are passionate about Electronics.
  • NIT Trichy has lower academic fees than IIT Bhubaneswar. But it may vary for different courses. The course fee of B.Tech in NIT is 72,100 whereas in IIT Bhubaneswar it is 1.4 lakh.
  • In terms of quality of infrastructure and social life, NIT Trichy is better than IIT Bhubaneswar as it is much older.
  • NIT Trichy ECE in 2019 has undergraduate placement of 95% and IIT Bhubaneswar Metallurgy has 90% placement in 2019.
Read More
0
0
Share
1 Answer