Get Answers on Test Preparation, Admissions & Campus Life
Study Abroad Countries
What is the internet speed at the IIT Mandi's hostel?
IIT Mandi hostel offers free Wi-Fi to students with high internet speeds of around 100 Mbps. Students can get access to Wi-Fi without any limits. Earlier, the speed of the internet in the hostel was an issue for the students. But now, with the advancement of technology, everything has become easier. Hostels at IIT Mandi are well-updated in terms of technology.
What is it like to do an MS in IIT, Mandi?
To be very honest, doing MS from IIT Mandi is not a great decision. It completely depends on the branch that you choose. Suppose you choose Computer Science (Image Processing and Communication), then you may get better results with respect to placements. If you choose to pursue MS in Electrical: Control, Power Drives, Sensors, etc., then the chances of placement are very minimal. For the other branches like Thermal, Design, and Material, etc., the only option you will have is going for a doctorate.
Although, if you have set your mind that you will go for a doctorate program after MS, then IIT Mandi is a good option because the tag of IIT will definitely help you in the future. But in case you are hopeful of getting placed after completing MS from IIT Mandi, then you are at the wrong place. Choosing one of the old NITs will help you more.
Which one should I choose, CSE in the MNNIT Allahabad or mechanics in the IIT Mandi? Why?
Both CSE at MNNIT and Mechanics at Mechanics IIT Mandi is highly esteemed programs. The choice of the institute depends on your personal interests and career prospects. The branch you choose is more crucial than the institute from which you pursue it. So make sure your passion is the driving factor in choosing your branch.
If you have an interest in either CS or Mechanics go for them respectively. When you pursue a stream of your choice, the chances of you becoming successful increase as you are motivated for a long time. But if you are not certain about your inclination, then my suggestion is CSE at MNNIT. CS program is well-regarded and is one of the highest-placed branches in MNNIT.
Personally, I would never recommend anyone to go for IIT Mandi as it is a relatively newer college than MNNIT because of which it lacks in terms of alumni and industrial ties. Additionally, the faculty of IIT Mandi is not at par with old colleges. The only reason one can join IIT Mandi is when they are adamant about the IIT tag. Else, MNIT CS will not disappoint you.
Ultimately, it is important to research both programs and consider factors such as location, campus culture, course offerings, and job prospects before making a decision.
What is the current status of the IIT Mandi campus, hostels and facilities?
IIT Mandi campus is situated in Kamand village which is 15 km from MANDI town. There is an institute bus facility available from Mandi to IIT. The North and South campuses are separated by a mountain. While the South campus has been developed completely, the North campus is still under the construction phase.
The 1st and 2nd-year students reside in the South campus, while the 3rd and 4th-year students reside in the North campus. The South campus has all types of sports facilities like a cricket ground, football ground, basketball court, volleyball court, badminton court, etc. The North campus has a swimming pool facility.
The hostels are well facilitated with amenities like washing machines, microwaves, iron, refrigerator, water purifiers cum water coolers, etc. The hostel buildings are built with superior quality material which keeps the temperature good enough during winters.
The food served in the mess is better than the food which is given in PG’s. The food is worth the mess expense. Additionally, the serene beauty of the campus makes it a more joyful experience.
How is IIT Mandi for an M.Tech in the electrical department?
IIT Mandi is a reputed institute for engineering education in India and is known for its strong emphasis on research and innovation. The electrical department at IIT Mandi offers an M.Tech program with a focus on electrical engineering, power systems, and renewable energy. The program is well-regarded by the industry and academia. The students of this department are provided with ample opportunities to engage in cutting-edge research projects.
Masters from any IIT will have equal worth all you need to do is make the most out of your degree. I know a friend who completed his master's from IIT Mandi in signal processing. He availed all the opportunities offered and invested maximum time and effort. Today he is pursuing his Ph.D. from the University of Texas Dallas and is also a Research Assistant at UT Southwestern.
Overall, IIT Mandi is a great choice for anyone interested in pursuing an M.Tech in electrical engineering.
How is IIT Mandi for CS or Mechanical?
IT Mandi is considered to be a highly reputable institution for both Computer Science and Mechanical Engineering programs. According to NIRF, IIT Mandi was ranked 43rd in 2022 and has consistently been ranked among the top engineering institutes in India.
One of my close friends was a student of Mechanical Engineering at IIT Mandi and shared his experience at the institute for 4 years. He told me that engineers should never choose a branch just because it’s better than the other and only be driven by their passions and inclinations.
IIT Mandi CS branch has been growing at a fast pace. This branch guarantees good salary packages, a very dynamic peer group, research-oriented culture, and a very found and zealous faculty pool. Additionally, the Computer Science and Engineering program at IIT Mandi has been accredited by the National Board of Accreditation (NBA) and is considered to be of high quality.
The Mechanical Department on the other hand is yet to reach the IIT standards and it still falls behind in terms of faculty base, infrastructure, and quality course curriculum. However, you will find quite a few PSUs like BPCL, ISRO, and Coal India offering good opportunities to BTech students that speak of the general credibility of the institute.
Ultimately, it is important to choose a program that is the best fit for you and that will allow you to reach your goals.
Which IIT is good for electrical engineering (if I am thinking of a branch change to CS afterward), IIT Mandi or IIT Jodhpur?
In case you are considering a branch change, the better option between IIT Mandi and IIT Jodhpur is the latter. Here are 2 solid reasons that support my stance.
- The batch size of IIT Jodhpur is small with around 60 students only. As per the branch change policy, 5% of the batch can change their branch and the total strength can be increased to 5% only. This policy works in favor of CSE students who are more in number. This is because the higher the number of students per branch, the higher will be the chances of the branch transfer.
- Secondly, if you are unable to get a branch change, IIT Jodhpur has an excellent alternative plan. It has a unique program called IIP under which students get 3 years of internship. On the basis of your performance, you might get placed as you hold a strong resume. This program is unique and no other institute offers it. This ensures a safe alternative in case of failure to change the branch.
In the end, it’s better to visit the websites of both IITs and go through their programs, as well as talk to current students or alumni to get a better sense of which one might be a better fit for you.
Which of the following would be better choice, an electrical at IIT Mandi, Jodhpur, Ropar, or a CSE at IIT Dharwad, Bhilai, Goa (specific interests computer science)?
You can go with the option of IIT Mandi. The recruiters from CSE offer high job packages every year to the students. IIT Mandi is the best place to change your branch to CSE, as it is one of the most competitive fields. You will be placed in a good company with high packages as a fresher in your favorite CSE field. When compared with the semi-new IITs, the best option would be Mandi. For other IITs, branch change might be a difficult task. Over the last three years, about 167 students got enrolled for placements; among them, 156 were placed. So IIT Mandi is a good choice.
What is the greatest disadvantage/advantage of choosing IIT Mandi?
Every coin has 2 sides and so does every decision you make. Joining IIT Mandi is one such decision that will bring many advantages and disadvantages. It’s up to you to weigh them and decide.
Pros
- IIT Mandi campus is one of the most beautiful and surreal places to study at.
- You get access to a plethora of interdisciplinary subjects apart from your core courses, thus enabling you to explore various fields.
- The small batch size in turn results in a better faculty-student ratio. One can easily approach the faculties and discuss anything regarding ideas, projects,etc.
- Branch change policy is very lenient thereby increasing your opportunities to change your branch in case you later find out you have no interest in the field.
- IIT Mandi has ties with world-famous technical institutes.
- The student exchange program enables a lot of students from IIT Mandi to go to countries such as Germany, Sweden, etc. every year. One such university is the Technical University Munich.
Cons
- IIT Mandi is still in its development phase and thus its infrastructure is way behind that of old IITs.
- IIT Mandi is 15 km away from the main Mandi city. Students have to travel 45 minutes on the bus just to go out to eat at a good place or party.
- IIT Mandi inter-college fests are not of the same level as that of old IITs so you will be missing out on a lot.
Overall, it’s necessary to contact the current students and make a decision only after weighing the pros and cons.
How is mechanical engineering at IIT mandi?
According to recent reviews and ratings, the mechanical engineering program at IITMandi is well-regarded. The program lays a strong foundation in the field and prepares them well for careers in industry or further study.
- Mechanical Engineering at IIT Mandi has a well-structured and flexible curriculum that bends as per the recent trends in the industry.
- The first 3 semesters have common IC courses that are common to all branches.
- In the first semester, you will be taught Engineering drawing which is the foundation course of ME.
- In the second semester, the number of courses increases. Some of the common courses added are Thermodynamics, Mechanics for waves and particles, and Product Realization Technology.
- The second semester also witnesses mechanical lab sessions that help transform your theoretical knowledge into practical implementation. You become familiar with many machines.
- The second year welcomes another set of courses like Machine drawing, Rigid Body, and Materials Science
Basically, students are taught a few courses on ME every semester till the 2nd year, and starting from the 3rd year, they are taught core courses on ME.
Here is a short table of IIT Mandi placements (Mechanical)
|
Total Number of Students |
24 |
|
Eligible Students |
19 |
|
Number of Students Placed |
16 |
|
Number of Placement Offers |
19 |
SUBSCRIBE TO OUR NEWS LETTER
