Select Goal &
City
Select Goal
Write a ReviewGet Upto ₹500*
Explore
Explore More
review_banner
Course Finder
    No Data Found

BTech in Production Engineering: Course, Admission, Eligibility, Colleges, Syllabus, Scope, Salary 2023

Sounak Banerjee's profile photo

Sounak Banerjee

Associate Content Manager

Bachelor of Technology [B.Tech] (Production Engineering) - Latest Notifications

BTech in Production Engineering is a 4-year full-time graduation programme that deals with manufacturing, engineering, management and improvement of complex procedures that are used in production processes. It teaches about the engineering procedures that are involved in production and manufacturing processes. The objective of this course is to improve efficiency, increase the manufacturing effectiveness and quality control, reduce costs that are involved in production and also increase marketability at the same time. 

Admissions to this course are done on the basis of entrance exams such as IIT JEE Mains and Advanced. There are also certain colleges that conduct their own entrance exams such as BITSAT for Birla Institute of Technology. Also, some colleges accept admissions on the basis of IIT scores. After the exam results are out, the shortlisted candidates are then called for counseling where admission can be confirmed. 

B.Tech Course Details:

B.Tech Overview B.Tech Admission

Some of the top institutes that offer B.Tech. Production Engineering are NIT Trichy, NIT Calicut, NIT Agartala, Jawaharlal Nehru Institute of Technology, Hyderabad, Kalinga Institute of Industrial Technology, Orissa, etc. the average course fees is between INR 50,000-3.5 L for the entire duration of the course. The average starting per annum salary that B.Tech. Production Engineering graduates range between INR 3-7 LPA. 

BTech in Production Engineering: Highlights

Tabulated Below are some of the basic details of the course for your better reference. Candidates must refer the whole article for deep knowledge about the course, 

Course Name BTech in Production Engineering
Course Duration 4 years
Exam Type Semester Type
Eligibility Criteria 10+ 2 or equivalent degree from a recognized institute with a minimum of 50% or above.
Candidate must also clear the entrance test
Selection Process Entrance Exam
AVerage Course Fees INR 1,20,000 - 10,00,000
Job positions Production Engineers, Process Engineer, Industrial Managers, Quality Engineers, Operations Analyst, Management Analysts
Top Recruiters NTPC, Hyundai, ONGC, Geometric, Tata Power, Godrej, Larsen & Toubro, Reliance Industries
Employment Areas Pharmaceuticals, Research Labs, Manufacturing Sector, Communication Sector, Information Technology
Average Annual Salary INR 7,12,000 - 14,20,000 per annum

What is BTech in Production Engineering?

  • BTech in Production Engineering is a 4-year undergraduate programme divided into 8 semesters. 
  • This course is a mixture of management and engineering concepts and helps candidates understand industrial production and the problems and concepts related to it clearly.
  • Production Engineering also deals with designing and installing integrated equipment to improve productivity.

What does a BTech in Production Engineering do?

  • Production engineers are responsible for supervising the manufacturing processes and ensuring that quality work is produced in an efficient and safe manner.
  • They have to cooperate with other engineers to improve designs of equipment in such a way that they offer better services and also cut costs.
  • Production engineers must identify the problems in a production line and suggest strategies that would help improve those issues.
  • Since production engineers are required the most in factories and industries, they have to also take care of the environmental aspect and devise strategies that would reduce carbon emissions. 
  • They also have to be careful about enforcing the safety protocols and procedures. 
  • They must also guide the new workers and instruct them well about the workings of the organizations. 
  • They must schedule time-to-time meetings with various departments to keep up with their work and write regular reports about the progress of the systems and production lines.
How to Become a Production Manager ? How to Become a Production Planner?
How to Become A Plant Manager? How to become a Manufacturing Production Technicians?

Why Study BTech in Production Engineering

Production Engineering offers very lucrative job opportunities in India and abroad. Some benefits of studying this discipline have been mentioned below:

  • Since this discipline is about the working and management of industries and factories, it offers many job opportunities within the industrial sector and provides skills that are required to be a part of the industrial sector.
  • This program provides a creative platform to the engineers to implement their ideas and research for the betterment of the sector.
  • Experience built in this discipline is also important as the engineers get to experiment and use modern tools and equipment.
  • This discipline offers profitable salaries to its engineers. 

Who should study BTech in Production Engineering?

  • This course can be pursued by anyone who has interest in Industrial Management and has commercial awareness. 
  • Candidates who have the ability to work under pressure, possess excellent problem-solving skills and ability to work in a team should pursue the course.
  • Aspirants who have technical and analytical skills can also pursue this course.
  • Apart from this, candidates must also have communication and interpersonal skills. 

BTech in Production Engineering: Admission Process in India

The admission process does differ from one college to another. The eligibility criteria might also differ. Candidates must check the eligibility criteria criteria before applying for the program. The basic eligibility criteria is that the candidates must have completed their 10+2 from science stream from a recognized board.

  • First, the candidates have to register themselves for the exam with basic details like name, email id and mobile number.
  • The applicants must fill the application form correctly with all necessary details and ensure that all details are accurate.
  • Candidates must scan and upload the necessary documents.
  • They have to pay the fees after completing the application process.
  • After filling the form, admit cards to the exam will be released soon as soon as the date for the exam is out. Candidates can download the admit cards from the official website.
  • Candidates must go through the past year papers and syllabus to prepare for the entrance exam.
  • After giving the exam, the results are announced. Candidates can check their results on the official website itself. 
  • If the candidates secure admission through the cut-off released, they will have to undergo through the counseling and admission process. 

BTech in Production Engineering Course: Eligibility

The eligibility criteria for B.Tech. Production Engineering is as follows:

  • Candidates must have completed their 10+2 from the science stream from a recognized board with a 50% aggregate.
  • Candidates must take any of the following entrance exams to secure admission in an Engineering college like IIT JEE, SRMJEEE, WBJEE, UPTU, etc. 
  • Admissions to most engineering universities are done on the basis of the score of the common entrance exam. 

BTech in Production Engineering Course: Entrance Exam

Entrance Exams Exam Dates
JEE Mains Check Here
JEE Advanced Check Here
WBJEE Check Here
VITEEE Check Here
SRMJEE Check Here
KEAM Check Here

BTech in Production Engineering Course: Admission Process in Abroad

There are many universities abroad that offer B.Tech In Production Engineering. Candidates willing to study abroad can opt to pursue the course from any of the top colleges mentioned below. The criteria of B.Tech in Production Engineering is quite different from that of India. The criteria is mentioned below, 

  • Candidates will be required to appear for Graduate Record Examination (GRE) exam
  • The candidates will be required to fill the application form online 
  • They must pay the application fees online 
  • Candidates with valid GRE scores can apply for the course.
  • Candidates will be required to submit the Statement of Purpose specifying the reason for studying in that college and the purpose of doing the course with all academic qualifications.’
  • Candidates must also submit 2 Reference letters of the academic professional from the last college attended.
  • Candidates will also have to submit proof of their finances.

BTech in Production Engineering Course: Eligibility Criteria

The eligibility criteria abroad is very different from that of India. Some of the eligibility criteria is mentioned below for your reference, 

  • Candidates must have Completed their 10+2 from the science stream from a recognized board. 
  • Candidate must also clear Graduate Record Examination (GRE)
  • Candidates must have a valid score in the GRE.
  • They must also have a valid English Language test score like IELTS, TOEFL, etc. 

BTech in Production Engineering Syllabus

First Year
Professional Communication Environmental Studies
Engineering Mathematics-1 Engineering Physics
Engineering Chemistry Fundamentals of Electrical Engineering
Fundamentals of Electronics Engineering Engineering Drawing
Fundamentals of Mechanical Engineering Technical Communication
Engineering Mathematics-2 Fundamentals of Computer
Second Year
Engineering Mathematics-3 Computer Programming and Numerical Methods
Machine Drawing, Civil Drawing and Estimation Kinematics of Machines
Mechanics of Solids Production Process-1
Machine Tools-1 Production Drawing
Metal Joining Processes Fluid Mechanics and Machines
Metallurgy and Material Science Numerical Techniques
Third Year
Applied Statistics Resource Management Techniques
Reliability, Maintenance and Safety Engineering Dynamics of Machines
Non Traditional Manufacturing Processes Computer aided Drafting and Cost Estimation
Thermal Engineering Computer Graphics and CAD
Design for Manufacture and Assembly Design of Machine Elements
CNC Machines Metrology and Quality Assurance
Fourth Year
Manufacturing System and Simulation Work Design and Facilities Planning
Automation and CIM Fluid Power Control and Mechatronics
Industrial Economics Fluid Power Control
Manufacturing Planning and Control Elective-1
Elective-2 Design of Production Tooling
Colloquium Project
Elective I Elective II
  • Communicative English and technical writing
  • Human aspects of management
  • Disaster Management
  • Glimpses of the world thought
  • Professional ethics and human values
  • Environmental Science
  • Advanced Welding technology
  • Foundry Technology
  • Environmental Pollution Control
  • Advanced Fluid Mechanics
  • Composite Materials Technology
  • Internet Technologies
  • Non-Destructive Testing
  • Powder Metallurgy
  • Vehicle Transport & Fleet Management
  • Automotive Air-conditioning
  • Two and Three-Wheeled Vehicles
  • Advanced mechanics of solids
  • New Energy systems
  • Object-Oriented Programming
  • Nuclear Engineering
  • Mechanical working Methods
  • Artificial Intelligence Systems
  • System Modeling & Simulation
  • Instrumentation and control
  • Materials Handling
  • Agro Machinery
  • Total Quality Management
  • Precision Engineering
  • Advanced Manufacturing Processes
  • Material Characterization
  • Micromachining Methods
  • Tool Engineering (MU)
  • Vehicle Body Engineering
  • Vehicle Performance and Testing
  • Automotive Fuels & Alternate Fuels

BTech in Production Engineering: Top Colleges in India

The average fees of this course is around INR 36,000 - 5,00,000 for the entire duration. Some of the top colleges in India are mentioned below for your reference, 

Name of the College City Average Fees
National Institute of Engineering Trichy 1,61,700
National Institute of Engineering Calicut 53,622
Woxsen University Hyderabad 3,62,500
Birla Institute of Engineering Ranchi 2,85,000
Jawaharlal Nehru Technological University Hyderabad 3,12,000
BML Munjal University Gurugram 2,52,000
kalinga Institute of Industrial Engineering Orissa 3,50,000
University of Engineering and Management Kolkata 1,71,000
National Institute of Engineering Agartala 1,50,100
Greater Noida institute of Engineering Greater Noida 1,27,970

BTech in Production Engineering: College Comparison

Particulars IIT Delhi IIT Roorkee DTU Delhi
Overview Established in 1961, this public technical and research institute is globally acclaimed for its standard of teaching. It offers various undergraduate, postgraduate, diploma and doctoral courses and admissions are done on the basis of IIT JEE. Established way back in 1847, this institute is the oldest IITs of all. It has 22 departments and offers various undergraduate, postgraduate, diploma and doctoral courses in Engineering, Applied Sciences, Humanities & Applied Sciences and Management with special emphasis on technological research. Established in 1941, it was first affiliated to the University of Delhi but in 2009, it attained the University status and came to be known as Delhi Technological University. It offers various undergraduate and postgraduate courses and admissions are done on the basis of JAC-Delhi.
NIRF Ranking 2 6 35
Fees 8.09 L 8.52 L 7.81 L
Salary package 16 LPA 24 LPA 15.31 LPA

BTech in Production Engineering: Top colleges in World

Apart from India, There are several colleges abroad in which the candidate can opt to pursue BTech in Production Engineering . Some of the top Countries are USA, UK, Canada, Australia. Tabulated below are the top colleges along with their average fees are mentioned below for your knowledge, 

Name of the College City Average Course Fees
University of Nottingham United Kingdom 24,63,300
University of Engineering Australia 42,51,000
University of Texas United States 26,65,000
Confederation College of Applied Arts and Engineering Canada 19,69,000
Lawrence Technological University United States 36,77,000
RMIT University Australia 41,81,000
Chisholm Institute of TAFE Australia 29,69,000
University of New South Wales Australia 23,60,000
University of Sydney Australia 36,38,000
McMaster University Canada 18,81,000

BTech in Production Engineering: Alternative Courses

Particulars B.Tech in Industrial & Production Engineering B.Tech in Industrial Engineering B.Tech in Industrial Engineering & Management
Overview It is a 4-year undergraduate programme divided into 8 semesters that focuses on the study of developing, implementing, improving and installing systems that benefit the industrial processes. It is a 4-year undergraduate programme divided into 8 semesters that focuses on imparting knowledge about the industrial processes like designing and installing equipment, production, manufacturing, etc. It is a 4-year undergraduate programme divided into 8 semesters that combines the aspects of management and engineering by teaching about industrial development along with managerial concepts.
Average course fees 80,000-2,00,000 80,000-4,25,000 1,00,000 - 4,00,000
Top Colleges IIT Delhi, IIT Roorkee, VIT, BIT Ranchi IIT Kharagpur, IIT Delhi, IIT Roorkee, BIT Pilani IIT Delhi, IIT Kanpur, IIT Bombay, Jadavpur University
Average Salary Package 16 LPA 12 LPA 13.58 LPA

BTech in Production Engineering Jobs

Job Profile Description Average Annual Salary
Production Engineer Production engineers are responsible for supervising and improving production in a factory or industry and make sure that no safety protocols are breached and everything runs smoothly. 3 LPA
Process Engineer A process engineer specializes in equipment that processes raw materials to finished products. 4.1 LPA
Industrial Managers A management engineer makes sure that all operations within an organization run smoothly. 25 LPA
Quality Engineers A quality engineer is responsible for ensuring that all the manufactured products meet certain quality standards. They also conduct certain tests to ensure the same. 5 LPA
Operations Analyst An Operations analyst is responsible for solving internal problems within an organization and ensuring the implementation of business oriented strategies. 4.75 LPA
Health and Safety Engineers Health and Safety Engineers are experts who combine the knowledge of engineering and health to design systems that do not harm people physically and also protects from damage. 5.68 LPA

BTech in Production Engineering: Scope

  • BTech in Production Engineering has many job opportunities in India and abroad.
  • Since the economy of countries is increasingly becoming dependent on its industries and factories, they are growing at a very fast pace and so is the demand for production engineers, quality engineers, industrial managers, operations analysts, etc. 
  • Moreover, production engineering offers a lucrative salary as well and has been considered as a safe option professionally.
  • Therefore, production engineering has a lot of scope in the coming times. 

BTech in Production Engineering: Salary

According to Glassdoor, the candidate who has completed Bachelor in Technology in Production Engineering can expect a starting salary of more than INR 4,75,000 per annum. The salary is also dependent on a number of factors like skills, location, experience, company profile etc. Tabulated below is the salary of the Candidates based on the years of experience,

Years of Experience Average salary Package
0 - 3 years 4.5 LPA
4- 6 years 6 LPA
7-10 years 9 LPA
11-15 years 12 LPA
16 - 20 years 14 LPA

BTech in Production Engineering: FAQs

Ques. What are common entrance exams for BTech in Production Engineering ?

Ans. There are some of the common entrance exam that the candidate is required to appear in order to get admission in the program:

  • IIT JEE
  • CUET
  • TANCET
  • SRMJEEE

Ques. What is the scope of BTech in Production Engineering in India?

Ans. The scope of BTech in Production Engineering is quite extensive. Due to the continuance growth in demand, the candidate will get to explore various opportunities in the automobile, refinery, construction, finance, etc.

Ques. How Can one pursue a BTech in Production Engineering ?

Ans. In order to pursue BTech in Production Engineering , the candidate will be required to appear in the entrance test such as GATE, CUET, etc and on the basis of that score the candidate will be given admission 

Ques. What are the job profiles after BTech in Production Engineering ?

Ans. Some of the popular job profiles after BTech in Production Engineering are: 

  • Production engineer
  • Quality engineer
  • Operations analyst
  • Management engineer

Ques. What are the employment areas after completing a BTech in Production Engineering ?

Ans. some of the employment areas after completing B.Tech. in Production Engineering are:

  • Automobile sector
  • Refinery
  • Textile industry
  • Railways
  • Finance

Ques. Can a BTech in Production Engineering be done from a distance?

Ans. Yes, this program can be done from a distance however, it is better to pursue this course from a regular college. 

Ques. What is the highest salary after completing a degree in BTech in Production Engineering ?

Ans. According to Glassdoor, the highest salary after completing a BTech in Production Engineering is around INR 25,00,00 per annum.

Ques. Name some of the top colleges for BTech in Production Engineering ?

Ans. Some of the top colleges for pursuing BTech in Production Engineering are:

  • IIT Delhi
  • IIT Roorkee
  • IIT Kharagpur
  • NIT Trichy

Ques. Who are the top recruiters for BTech in Production Engineering ?

Ans. Some of the top recruiters for BTech in Production Engineering are 

  • Tata power
  • ONGC
  • Reliance
  • NTPC

Bachelor of Technology [B.Tech] (Production Engineering) : 37 answered questions

VIEW ALL

Ques. Which is better- IEM in Ms. Ramaiah or EEE in Dayanand Sagar College of Engineering?

● Top Answer By Sushmita Raj on 17 Sept 21

Ans. After doing some research online, I would suggest not to go for IEM at Ramaiah, until and unless you are extremely interested in studying that particular subject. Since it will not pay you anything and you will eventually wind up in the same category of mass placement at one of the service-based companies.  Double-check the topics you will be studying. EEE is usually less exposed than IEM, yet EEE is regarded as the most complex branch to be studied.  The majority of EEE / ECE / other branches receive job offers from Infosys, HCL, Accenture, or Tech Mahindra. Parameters IEM at Ms. Ramaiah EEE at Dayanand Sagar College of Engineering Tuition Fees INR 3.47 lakh  INR 10 lakh Placement Percentage 95% 70% Highest Package 13 LPA 15 LPA Average Package 7.6 LPA INR 8 LPA So, what is the point of learning core Electronics if all you have to do at the conclusion of your engineering degree is code? If you want to build a career, think seriously about the branch you select. Regardless of the institution you attend, I believe EEE is far superior to IEM. Pursue EEE only if you are truly passionate about the subject.Read more
0
0
1 Answer
●●●
Upvote
Downvote
Report

Ques. How is production engineering at nit calicut?

● Top Answer By Shaurya Singh on 25 Mar 21

Ans. You must know what you are getting yourself into. The mechanical engineering department of NITC offers 2 BTech courses that are Mechanical and Production. Both of these departments share faculties, labs, some courses, and other facilities. But at the end of the day, both are different courses. There are two types of people seen in Production Engineering at NITC: Students who wanted to study mechanical, but didn’t have the rank for it or could only get mechanical at other NITs. Production is after all similar to mechanical. Students who didn’t have an appropriate rank to choose a branch/college of their choice, but still wanted to study in an NIT. There are few things that students commonly felt during their days: Students are often seen saying that they should get mechanical equivalent certificates. There is no purpose in saying this as they are two different branches. Students also complain that teachers are biased. Few teachers refrain from teaching students from production batches. Mechanical batches are taught mostly by permanent faculty while production batches get guest faculties. There are very few placement opportunities for Production batches in comparison with Mechanical. Core companies are even fewer. The students of Production are often isolated from other batches of students. They are allotted spare rooms. Categories Production Engineering at NIT Calicut Course Fee 5.42 lakh Placement Percentage 70-80% Highest CTC 8 LPA Average CTC 6 LPA Recruiting Companies Tata, Bajaj, HPCL, BPCL, TCS, Texas Instruments, etc. The placement options are not as rare as students may make out, but it may not be in the field that they are looking for. So in the end one can say that, if the student truly wants to be a mechanical engineer, then this college probably isn’t for you. If they just want the NIT experience, then they should know what options they will have after college.Read more
0
0
1 Answer
●●●
Upvote
Downvote
Report

Ques. What is the prospect of production engineering in NIT Trichy?

● Top Answer By Himani Bose on 23 Mar 21

Ans. Many people think that production engineering is mechanical minus thermodynamics. Which is not true. Production engineering is completely different from mechanical as the subjects are different. My friend is currently in the 4th year of production engineering, NIT Trichy and according to him, it doesn’t really have a good prospect. Here’s why: While other departments have 6 subjects per semester you’ll be having 7. This can get quite hectic for you at times. Despite so much hard work, placements are not good at all. You will never be treated equally to your mechanical friends, however good your profile is. Although you can go into most of the mechanical engineering fields like automobiles, industrial tools making, etc. you will be paid lesser than your mechanical engineer mates. However, if you are planning for higher studies and research, then production is a very good choice. Being a production engineer opens up the manufacturing, industrial, and mechanical higher study options too. So, if placement after B.Tech. is your focus, please look elsewhere but if you are into higher studies then surely go for it. Choose wisely.Read more
0
0
1 Answer
●●●
Upvote
Downvote
Report

Ques. Which would be better to take from NIT Trichy: instrumentation and control or production?

● Top Answer By Anirban Biswas on 04 Sept 21

Ans. I know a little bit about ISI Kolkata since I have a few friends from the institute. Here is what you should know about the internships between semesters.  The course curriculum specifies that in the summer after completing your first year of M.Tech, you have to do an internship either in the industry or academia. You will have 3 options.  Industry: Many companies that visit the Campus for placements of 2nd-year students also select interns for the same. Some of such companies are Samsung Research Labs, Google, General Electric, Reliance, Flipkart, De Shaw, JP Morgan Chase, etc. The average stipend offered last year was 65,000 rupees/month. Some companies offer more than 1 lakh/month. One of my friends interned at Samsung Research Labs. Academia: As per ISI guidelines, you need to pursue an internship at a different academic Institute or industry. A friend of mine went to NUS Singapore, while two others went to a university in Germany. You can also apply to other institutes in Japan, USA, and Europe. People also go to IITs, CMI, and other Tier-1 Institutes of India. Within ISI: If for some reason you could not get an internship in the above-mentioned ways, you can approach any of the 250+ faculty members across all 5 ISI‘s and can ask to work with them in their labs. You will have internships at the end of the first year. In the second year, you will have placements, dissertation, academics. So, the only time left to do an additional internship is the winter break after the first sem. Unless you are extremely enthusiastic, I will suggest that you take a break during this period. Because after the break you will be swamped with coursework for 1.5 years.Read more
0
0
1 Answer
●●●
Upvote
Downvote
Report

Ques. Should I choose BIT Mesra or NIT Agartala for production engineering?

● Top Answer By Tithi Aggrawal on 19 Sept 23

Ans. Unquestionably BIT Mesra would be a better option than NIT Agartala. According to India Today BIT Mesra comes in third position among all top engineering colleges of India. There are several reasons to choose BIT Mesra over NIT Agartala they are as follows: Ranking: BIT Mesra ranked 53 among the top engineering colleges of India whereas NIT Agartala stood 91 among them. Placement: Last year in campus placement of BIT Mesra the highest package offered was INR 58.33 LPA and an average package of INR 13.01 LPA. Top recruiters like Hashed In, Persistent Systems, Cognizant, Daffodil Software, etc. visited the campus for placement. Infrastructure: The hostel rooms at BIT have great high-speed internet access. Almost every sort of resource is available. Campus life and dorm life are excellent. Alumni: Hemant Soren (CM of Jharkhand), V. Vaidyanathan (Managing director and CEO of IDFC First Bank), Rohit Pujari (Minister of State of Higher Education of Odisha), etc. are a few notable alumni of this organization. BIT Mesra offers a compelling opportunity for a solid academic foundation, good placement statistics, and a dynamic learning environment that is ideal for being a better choice than NIT Agartala.Read more
0
0
2 Answer
●●●
Upvote
Downvote
Report

Ques. Is production engineering good in NIT Jamshedpur?

● Top Answer By Ashish Singh on 20 Apr 21

Ans. Yes, both Production and Industrial Engineering of NIT Jamshedpur is a good department. Apart from your academics, you get time to work on your self-development. There is not much pressure on academics.  After completing your studies in production engineering at NIT Jamshedpur, several opportunities will open for you. Let’s take a look at the future in Production Engineering. Data Analysis : Data Analysis is one of the popular fields in which students opt. You can also enhance your skill by doing an online course. Companies such as Excel, Futures First, Mu-Sigma, Tredence, etc have NIT Production Engineering students as their employees. IT Sector: If you have strong coding skills, then you can get recruitment in Wipro, Capgemini companies. Core Field: If you wish to study mechanical engineering and opting for production engineering is a stepping stone, you could definitely shift branches. They both have subjects like quality control, supply chain management, manufacturing engineering, etc. Thus the branch usually does not matter if you hone the skills properly. Competitive Exams: You can also appear for GRE/GATE/ESE exams. Mechanical students too can sit for competitive exams such as GATE/ESE. Further Studies: You can also go for higher studies, such as MBA, M.Tech, PhD. The government also launched several schemes for scholarships for PhD students. Business : After completing your studies in Production Engineering you can also start your own business putting your unique ideas at work. Other Jobs: You can also go to the creative field. There are lots of creative fields in which Engineering students are opting including film making, content writing, graphic designing, stand-up comedy, etc. These jobs are rewarding and in demand too. Therefore, you can NIT Jamshedpur, as it is a good college. They have good facilities, average faculty, good hostel, good sports facilities, including basketball, football, etc. You can also join clubs which will help you in enhancing managerial as well as technical skills. NIT Jamshedpur also has a canteen, library, internet facility, and organizes cultural fests.  Its placement record is also good. The average salary students are offered is INR 12 LPA.Read more
0
0
1 Answer
●●●
Upvote
Downvote
Report

Ques. Is there any scope in industrial and production engineering in NIT Jalandhar?

● Top Answer By Rohit Sharma on 05 Jan 23

Ans. Whatever the scope of the industry, the "average pack" one receives is determined by one's skills and abilities, not by the degree or institution. Choose one track to which you can relate. Then, work hard to gain knowledge and skills so that you can one day demonstrate your worth to a selection board.Read more
0
0
2 Answer
●●●
Upvote
Downvote
Report

Ques. Which is a better choice among industrial systems engineering at IIT Kharagpur and electrical engineering at IIT Bhubaneswar?

● Top Answer By Admin on 18 Jun 24

Ans. It is tough to choose one institute over the other as all institutes have a different approach to teaching, subject curriculum, etc.  I can say with my personal experience that Industrial Systems Engineering at IIT Kharagpur is better than Electrical Engineering at IIT Bhubaneswar. IIT Kharagpur is one of the oldest and best engineering colleges in India. For the Industrial Systems Engineering branch, top recruiters like American Express, Capillary Technologies, Bosch, Tata Motors, etc. offer an average package between 13 LPA to 15 LPA, and the average placement rate for this course is over 75%.  Even though the statistics for Electrical Engineering placements at IIT Bhubaneswar are better, IIT KGP offers a much stronger alumni network and a richer legacy. To add to this, the flexible curriculum of IIT KGP makes sure that its students can easily fit into any sector.  After considering all the factors, I would suggest you choose Industrial Systems Engineering at IIT KGP over Electrical Engineering at IIT Bhubaneswar. But I would also point out that you must ultimately choose the branch which interests you the most. Read more
0
0
3 Answer
●●●
Upvote
Downvote
Report

Ques. How good is production engineering at BIT Mesra?

● Top Answer By Prithvi Shah on 16 Feb 21

Ans. The Production Engineering department at the Mesra campus, boasts of excellent facilities. A friend of mine recommended BIT Mesra as it is one of the best departments to opt for in BIT Mesra due to the following reasons:  The infrastructure here is great and boasts of well-equipped workshops and labs for forging, foundry, carpentry, welding, fitting, etc with all sorts of machinery. Most of the faculties here are very knowledgeable and will be helpful during your course. They make sure the subjects are understandable and interesting. Some of the topics are obsolete in today's world and you’ll need to update yourself as per current trends. The department organises Seminars and conferences regularly to keep students in trend with the industry. The workload is decently comparable when compared to other streams. So, if you can put some effort you can easily shine in the academics’ part. Placement wise although this department is not excellent you can try to be in the top 15 students in the batch so that you can grab good opportunities. Some of the top organizations such as Hero Moto Corp, Tata Motors, Maruti Suzuki, NBC Bearings, Vedanta, AVTEC LTD, etc visit the campus for roles related to production engineering. Apart from the placement opportunities, many students opt to pursue higher education too. Some of the seniors are pursuing their higher education from top institutes like IIM’s etc. To grab better opportunities, it is good to brush some basics related to Mechanical engineering such as SOM, Thermodynamics, I.C Engines, etc. As some of the Mechanical companies allow the students from production engineering for their recruitment process too.  Here is some information about the institute:  Highest Package 49.76 LPA Average Package 11.76 LPA Fees 11. 57 Lakhs INR No. of seats 15 NIRF Ranking 38 (For engineering) So, if you are interested in production engineering and willing to put in some effort to be on the top you can definitely opt for Production Engineering in BIT Mesra.Read more
0
0
1 Answer
●●●
Upvote
Downvote
Report

Ques. BIT Mesra CS or RVCE CS?

● Top Answer By Akriti Banerjee on 09 Aug 23

Ans. My sister is in her 3rd year of engineering at CSE RVCE. Earlier, she was going for BIT Mesra considering its better ranking and reputation over RVCE. But a friend asked her to reconsider her decision because RVCE CS placements are much better and with enough coding skills and a good CGPA, you can easily secure a 20+ LPA package. Bangalore as a city offers a plethora of opportunities and options, especially the young enthusiasts.  The institute has an active start-up culture and many students become entrepreneurs after a few years m. The BIT tag is slowly losing its credibility and worth as the quality of education is deteriorating day by day Bangalore's location offers more learning opportunities than Ranchi  The crowd here is very diverse so you get to experience a diverse culture and a new way of living that helps in personality grooming. RVCE has a management quota too so you will be surrounded by both talented as well as average students. Overall, I feel RVCE will offer better opportunities because of its excellent location in contrast to Ranchi.Read more
0
0
2 Answer
●●●
Upvote
Downvote
Report

Comments

No Comments To Show
Integrated COURSES with B.Tech
FEATURED COURSES
Udemy course

Bachelor of Technology [B.Tech] (Production Engineering) Colleges IN INDIA

View All
NIT Trichy
follow

NIT Trichy

Tiruchirappalli, Tamil Nadu
BE/B.Tech(4 Yrs)9.4
₹ 1.8 L first year fees
VIEW ALL COURSES & FEES
National Institute of Technology - [NITC]
follow

National Institute of Technology - [NITC]

Calicut, Kerala
BE/B.Tech(4 Yrs)7.9
₹ 3.19 L first year fees
VIEW ALL COURSES & FEES
College of Engineering - [COEP]
follow

College of Engineering - [COEP]

Pune, Maharashtra
BE/B.Tech(4 Yrs)7.3
₹ 1.42 L first year fees
VIEW ALL COURSES & FEES
National Institute of Technology - [NIT]
follow

National Institute of Technology - [NIT]

Agartala, Tripura
BE/B.Tech(4 Yrs)6.9
₹ 1.57 L first year fees
VIEW ALL COURSES & FEES
Sri Venkateswara University - [SVU]
follow

Sri Venkateswara University - [SVU]

Tirupati, Andhra Pradesh
BE/B.Tech(4 Yrs)6.6
₹ 25.23 K first year fees
VIEW ALL COURSES & FEES
Veermata Jijabai Technological Institute - [VJTI]
follow

Veermata Jijabai Technological Institute - [VJTI]

Mumbai, Maharashtra
BE/B.Tech(4 Yrs)6.5
₹ 85.55 K first year fees
VIEW ALL COURSES & FEES
Veer Surendra Sai University of Technology - [VSSUT]
follow

Veer Surendra Sai University of Technology - [VSSUT]

Burla, Odisha
BE/B.Tech(4 Yrs)6.4
₹ 91.28 K first year fees
VIEW ALL COURSES & FEES
Haldia Institute of Technology - [HIT]
follow

Haldia Institute of Technology - [HIT]

Haldia, West Bengal
BE/B.Tech(4 Yrs)6.2
₹ 1.63 L first year fees
VIEW ALL COURSES & FEES

SUBSCRIBE TO OUR NEWS LETTER

COLLEGE NOTIFICATIONS
EXAM NOTIFICATIONS
NEWS UPDATES
TOP COLLEGES
MBA
Btech
MS
BBA
Mtech
MA
BA
TOP UNIVERSITIES
engineering
management
medical
law
commerce
science
arts
Top Exam
GMAT
GRE
IELTS
DET
PTE
SAT
TOEFL
study abroad
canada
usa
uk
uae
australia
germany
sweden
ireland
new zealand
hong kong
singapore
malaysia
netherlands
italy
other links
about collegedunia
contact us
advertising
career
terms & conditions
Download the Collegedunia app on downloadapp_banner imagedownloadapp_banner image
© 2024 Collegedunia Web Pvt. Ltd. All Rights Reserved